view Agrigame Quad Bike Spreader details
Agrigame Quad Bike Autofeeder Spreader for feed, fertiliser or seed.
Features;
2.2 Cubic Foot Poly Hopper.
12v Motor with Variable Speed Controller VSC-10 and on-off Switch.
Stainless Steel Radial 6 Blade Fan.
Material Agitator.
5 to 45 Foot Variable Spread Width.

 
Agrigame Quad Bike Spreader Agrigame Quad Bike Spreader Agrigame Quad Bike Spreader ATVFS Agrigame Quad Bike Autofeeder Spreader for feed fertiliser or seed. Features 2.2 Cubic Foot Poly Hopper. 12v Motor with Variable Speed Controller VSC 10 and on off Switch. Stainless Steel Radial 6 Blade Fan. Material Agitator. 5 to 45 Foot Variable Spread Width. 430173421 £720.00 Available from: Agrigame UK Ltd New
view Solway Quadbike Mobile Feeder details
Features our new high output, high torque UK designed and built 12vdc motor and heavy duty wiring loom.

The new model comes with an updated wiring loom and handle bar switch allowing you to select continuous feeding or pulse feeding for periods of up to 10 seconds. The Solway mobile feeder scatters feed from your atv or quad bike along the length of each feed ride and by planning your entire feed route carefully, you will not only save yourself time, but you will also see your birds become wilder with less wandering, leading to a better spread over the guns.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The unit has quick release fasteners and does not restrict the addition of a trailer. The hopper is moulded from strong polyethylene with a recommended maximum capacity of 60kg. The lid is designed to be easily tilted, and has an internal bungee and cord retainer, and the spinner has raised rolled edges to prevent spillage. The feeder scatters food in a fourteen foot spread, and although the flow rate is fixed, the feed rate can be controlled by a pushed button on the handlebars. The powerful 12vdc motor runs on the vehicle`s battery, a wiring loom and plugs are provided to fit most agricultural quad bikes. If you are fitting to a non standard vehicle we can make a custom loom at additional cost. Connection must be made to a fused supply 15 amp fuse rating. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

The hopper is attached to the ATV with sturdy aluminium brackets, and can be unclipped and removed in less than thirty seconds.

Important when ordering this item, please specify the make and model of the atv that you plan to use it with, as well as the measurements of the back rack. The back rack of your atv must be made of round tubular steel, the feeder cannot be fixed to the cheaper plastic racks for safety reasons. The back rack must also be parallel sided not tapered or shaped/curved. Fits standard racks 7/8 inch (22mm) round tube 36-42 inches wide or 90 to 108 cms wide. If outside these measurements please consult our technical sales team.

Please check with your atv supplier that your particular machine is suitable to carry the extra loading on the back rack. We only recommend specifically designed agricultural machines of at least 350cc, preferably 4WD. Leisure & sports machines are not suitable, high speed is not required or desirable 10mph max when feeding on level ground. Reduce speed and load on hilly or uneven ground. The Solway machine feeder is designed for OFF ROAD USE ONLY, if you atv is fitted with road legal lighting some adjustment might be required by your ATV Dealer.

Approx. dimensions: 36ins (914mm) wide, 20ins (508mm) deep, 22 ins (558mm) high; height 22ins (558mm) at rear, 18ins (547mm) from rack. lid: 33ins diameter. spinner: 6.25 ins (160mm)
 
Solway Quadbike Mobile Feeder Solway Quadbike Mobile Feeder Solway Quadbike Mobile Feeder FE1301 Features our new high output high torque UK designed and built 12vdc motor and heavy duty wiring loom The new model comes with an updated wiring loom and handle bar switch allowing you to select continuous feeding or pulse feeding for periods of up to 10 seconds The Solway mobile feeder scatters feed from your atv or quad bike along the length of each feed ride and by planning your entire feed route carefully you will not only save yourself time but you will also see your birds become wilder with less wandering leading to a better spread over the guns Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The unit has quick release fasteners and does not restrict the addition of a trailer The hopper is moulded from strong polyethylene with a recommended maximum capacity of 60kg The lid is designed to be easily tilted and has an internal bungee and cord retainer and the spinner has raised rolled edges to prevent spillage The feeder scatters food in a fourteen foot spread and although the flow rate is fixed the feed rate can be controlled by a pushed button on the handlebars The powerful 12vdc motor runs on the vehicle s battery a wiring loom and plugs are provided to fit most agricultural quad bikes If you are fitting to a non standard vehicle we can make a custom loom at additional cost Connection must be made to a fused supply 15 amp fuse rating The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information The hopper is attached to the ATV with sturdy aluminium brackets and can be unclipped and removed in less than thirty seconds Important when ordering this item please specify the make and model of the atv that you plan to use it with as well as the measurements of the back rack The back rack of your atv must be made of round tubular steel the feeder cannot be fixed to the cheaper plastic racks for safety reasons The back rack must also be parallel sided not tapered or shaped curved Fits standard racks 7 8 inch 22mm round tube 36 42 inches wide or 90 to 108 cms wide If outside these measurements please consult our technical sales team Please check with your atv supplier that your particular machine is suitable to carry the extra loading on the back rack We only recommend specifically designed agricultural machines of at least 350cc preferably 4WD Leisure sports machines are not suitable high speed is not required or desirable 10mph max when feeding on level ground Reduce speed and load on hilly or uneven ground The Solway machine feeder is designed for OFF ROAD USE ONLY if you atv is fitted with road legal lighting some adjustment might be required by your ATV Dealer Approx dimensions 36ins 914mm wide 20ins 508mm deep 22 ins 558mm high height 22ins 558mm at rear 18ins 547mm from rack lid 33ins diameter spinner 6 25 ins 160mm £750.00 Available from: Agrigame UK Ltd New
view Solway Mule Type Mobile Feeder-Spreader details
Features our new high output, high torque UK designed and built 12vdc motor, supplied with an adjustable spread deflector plate and a very basic wiring loom ***

The Solway Mule Feeder is suitable for most UTV`s, Mule, Gator, Kubota etc. If you are intending to fit the machine to some of the plastic bed models such as Polaris Can Am and some of the new Honda range of UTV`s extra strengthening / load bearing plates should be fitted on both sides of the bed by your UTV dealer. It can also be mounted in the load spaces of Landover`s, 4x4`s & pickups.

By scattering feed along the length of each feed ride and planning your entire feed route carefully, you will not only save yourself time, but you will also see your birds become wilder with less flushing, leading to a better spread over the guns.

The Solway Mule Feeder is totally weather proof and designed for constant flexing over rough ground. The unit has quick release fasteners which attach to a fixed plate in the carry space and this unobtrusive panel does not get in the way when the hopper is dismounted. The hopper is moulded from strong polyethylene with a recommended maximum capacity of 200kg. The lid is designed to be easily lifted and the hinged door is fully waterproof. The efficient spinner has raised rolled edges to prevent spillage. The mule feeder scatters food up to a fourteen foot spread, and although the flow rate is fixed, the feed rate can be controlled by a convenient button. Approx. 250g / 0.5lb feed per second based on cleaned dry wheat. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The powerful 12vdc high torque motor runs from the vehicle`s battery, via a very basic wiring loom provided with this item, (Does not include switch gear, relay switching or fusing link). Connection must be made to a switched, fused supply 15 amp fuse rating from the vehicle electrical system. We strongly recommend the use of a 20/30 amp fused relay in the circuit to protect the machine and vehicle wiring circuit. We can supply a custom loom to your requirements at additional cost, please contact our sales or technical department for more details. If you are in any doubt about the wiring to your vehicle please contact your ATV/UTV dealer or a qualified auto-electrician.

The utv tail-gate is best removed or in the fully lowered position. If the vehicle has a rear tipping mechanism this must be securely locked in the load carrying position.

We supply a variety of spare and supplementary parts for this item, including aluminium bosses, spinner plates, motors and high output motor housings.

The Solway mule feeder is rohs compliant.

Approx. dimensions: empty weight 40kg (approx.) hopper capacity 200kg max recommended based on dry cleaned wheat. Hopper dimensions 900x900x320mm approx.
 
Solway Mule Type Mobile Feeder-Spreader Solway Mule Type Mobile Feeder-Spreader Solway Mule Type Mobile Feeder Spreader FE1312 Features our new high output high torque UK designed and built 12vdc motor supplied with an adjustable spread deflector plate and a very basic wiring loom The Solway Mule Feeder is suitable for most UTVs Mule Gator Kubota etc If you are intending to fit the machine to some of the plastic bed models such as Polaris Can Am and some of the new Honda range of UTVs extra strengthening load bearing plates should be fitted on both sides of the bed by your UTV dealer It can also be mounted in the load spaces of Landovers 4x4s pickups By scattering feed along the length of each feed ride and planning your entire feed route carefully you will not only save yourself time but you will also see your birds become wilder with less flushing leading to a better spread over the guns The Solway Mule Feeder is totally weather proof and designed for constant flexing over rough ground The unit has quick release fasteners which attach to a fixed plate in the carry space and this unobtrusive panel does not get in the way when the hopper is dismounted The hopper is moulded from strong polyethylene with a recommended maximum capacity of 200kg The lid is designed to be easily lifted and the hinged door is fully waterproof The efficient spinner has raised rolled edges to prevent spillage The mule feeder scatters food up to a fourteen foot spread and although the flow rate is fixed the feed rate can be controlled by a convenient button Approx 250g 0 5lb feed per second based on cleaned dry wheat The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The powerful 12vdc high torque motor runs from the vehicles battery via a very basic wiring loom provided with this item Does not include switch gear relay switching or fusing link Connection must be made to a switched fused supply 15 amp fuse rating from the vehicle electrical system We strongly recommend the use of a 20 30 amp fused relay in the circuit to protect the machine and vehicle wiring circuit We can supply a custom loom to your requirements at additional cost please contact our sales or technical department for more details If you are in any doubt about the wiring to your vehicle please contact your ATV UTV dealer or a qualified auto electrician The utv tail gate is best removed or in the fully lowered position If the vehicle has a rear tipping mechanism this must be securely locked in the load carrying position We supply a variety of spare and supplementary parts for this item including aluminium bosses spinner plates motors and high output motor housings The Solway mule feeder is rohs compliant Approx dimensions empty weight 40kg approx hopper capacity 200kg max recommended based on dry cleaned wheat Hopper dimensions 900x900x320mm approx £1140.00 Available from: Agrigame UK Ltd New
view Solway Feeder Overcentre Clips details
This over centre clip is used to fix the solway mobile feeder to the rack of the ATV. All Solway mobile feeders are supplied with sufficient numbers of these clips, but it could be that a spare is needed. The item is supplied with fixing nuts and bolts. 
Solway Feeder Overcentre Clips Solway Feeder Overcentre Clips Solway Feeder Overcentre Clips FEAM0004 This over centre clip is used to fix the solway mobile feeder to the rack of the ATV All Solway mobile feeders are supplied with sufficient numbers of these clips but it could be that a spare is needed The item is supplied with fixing nuts and bolts £13.95 Available from: Agrigame UK Ltd New
view Solway Automatic/Mobile Feeder Spinner Plate details
This spare spinner plate is a replacement part for Solway Trailfeeder, Solway Mobile Feeder and Solway Mule Feeder. It is made from long lasting steel to cope with heavy use, and comes complete with the two screws needed to fit the plate. We recommended that a locking compound (such as threadlok) be applied to the screws when they are being installed. 
Solway Automatic/Mobile Feeder Spinner Plate Solway Automatic/Mobile Feeder Spinner Plate Solway Automatic Mobile Feeder Spinner Plate FEAM0001 This spare spinner plate is a replacement part for Solway Trailfeeder Solway Mobile Feeder and Solway Mule Feeder It is made from long lasting steel to cope with heavy use and comes complete with the two screws needed to fit the plate We recommended that a locking compound such as threadlok be applied to the screws when they are being installed £39.50 Available from: Agrigame UK Ltd New
view Solway Mule/Trail Feeder Deflector Plate details
Adjustable deflector plate suitable for fitting to either the Solway Trailfeeder or Solway Mule feeder. Directs feed towards left or right, narrow or wide spread. Direct replacement for factory fitted plate. 
Solway Mule/Trail Feeder Deflector Plate Solway Mule/Trail Feeder Deflector Plate Solway Mule Trail Feeder Deflector Plate FEAM0086 Adjustable deflector plate suitable for fitting to either the Solway Trailfeeder or Solway Mule feeder Directs feed towards left or right narrow or wide spread Direct replacement for factory fitted plate £78.00 Available from: Agrigame UK Ltd New
view Mobile Feeder Wiring Loom details
FEATURES RELAY SWITCHING COMPATIBLE WITH SOLWAY FEEDERS HD MOTORS & MACHINES

The HD version comes with an uprated wiring including inline fuse holder and handle bar switch, relay switching allowing you to select continuous or pulse feeding.This loom is standard fitting for most ATV Quad Bikes. A custom made loom to fit MULE or PICKUP type towing machines can be supplied at additional cost, please consult our technical department for more details. Please indicate the type, make and model of towing vehicle when ordering.

This new version wiring loom is suitable for most Solway Mobile Feeders dating back to 1992. Models prior to the end of 2016 will require adapting to fit your older machine, please contact our sales office for details and additional cost. Please quote the feeder model number, serial number and date code when ordering.

Since January 2017 the new type of loom with new switch gear has been supplied with ATV mobile & trail feeders 1308, & 1311. This loom can be fitted to older machines but requires the "S" type plug to connect to the feeder. The older type round black bulkhead 3 pin plug and socket are now obsolete. Please contact our sales office to confirm your requirements before ordering. Suitable for SOLWAY FEEDERS OEM machines only.


Fitting the new type SOLWAY loom to your ATV

Remove sufficient body panels to enable an easy route for the cable.

Ensure it fits fairly loosely with plenty of spare cable at the switch end allowing for the movement of the handlebars and controls and battery box end. The cable can be clipped or tied to the frame of the atv but make sure it is clear of any hot parts of the engine or exhaust system.

The switch is prewired and connected to the loom and only re-quires mounting on the left hand side handlebar as close to the other controls as possible.

The other end of the loom connects to the battery with the ring connectors provided. The fuse link wire connects to the Positive terminal and the plain end ring to the Negative terminal.

Connect the 7 pin Grey ā€œSā€ type plug to the feeder ā€œSā€ type socket and check the operation of the feeder motor. Press the top red switch into the on position. For continuous feed use the mid grey switch. For intermittent / pulse feed use the lower red push button . When not in use turn off the top red switch

Refit and secure all bodywork panels and recheck operation.

JANUARY 2017 
Mobile Feeder Wiring Loom Mobile Feeder Wiring Loom Mobile Feeder Wiring Loom FEAM0002 FEATURES RELAY SWITCHING COMPATIBLE WITH SOLWAY FEEDERS HD MOTORS MACHINES The HD version comes with an uprated wiring including inline fuse holder and handle bar switch relay switching allowing you to select continuous or pulse feeding This loom is standard fitting for most ATV Quad Bikes A custom made loom to fit MULE or PICKUP type towing machines can be supplied at additional cost please consult our technical department for more details Please indicate the type make and model of towing vehicle when ordering This new version wiring loom is suitable for most Solway Mobile Feeders dating back to 1992 Models prior to the end of 2016 will require adapting to fit your older machine please contact our sales office for details and additional cost Please quote the feeder model number serial number and date code when ordering Since January 2017 the new type of loom with new switch gear has been supplied with ATV mobile trail feeders 1308 1311 This loom can be fitted to older machines but requires the S type plug to connect to the feeder The older type round black bulkhead 3 pin plug and socket are now obsolete Please contact our sales office to confirm your requirements before ordering Suitable for SOLWAY FEEDERS OEM machines only Fitting the new type SOLWAY loom to your ATV Remove sufficient body panels to enable an easy route for the cable Ensure it fits fairly loosely with plenty of spare cable at the switch end allowing for the movement of the handlebars and controls and battery box end The cable can be clipped or tied to the frame of the atv but make sure it is clear of any hot parts of the engine or exhaust system The switch is prewired and connected to the loom and only re quires mounting on the left hand side handlebar as close to the other controls as possible The other end of the loom connects to the battery with the ring connectors provided The fuse link wire connects to the Positive terminal and the plain end ring to the Negative terminal Connect the 7 pin Grey S type plug to the feeder S type socket and check the operation of the feeder motor Press the top red switch into the on position For continuous feed use the mid grey switch For intermittent pulse feed use the lower red push button When not in use turn off the top red switch Refit and secure all bodywork panels and recheck operation JANUARY 2017 £107.50 Available from: Agrigame UK Ltd New
view Solway Automatic/Mobile Feeder Motor details
This assembly can be retro-fitted to most feeders back to 2000 and in some cases a modified version can be made to fit machines back to 1992. Please specify the model and year of your machine when ordering. Comes complete with alloy boss. New mount features anti-vibration system as standard.

The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced. If you are using this motor in a static /automatic feeder this may require increasing the feed period setting. If you are using it for any of the mobile feeders you may need to "spin" for a longer time. It is not recommended for larger kernal such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Please ensure these motors are connected with the correct battery polarity and have the correctly rated fuse in line 15amp.
 
Solway Automatic/Mobile Feeder Motor Solway Automatic/Mobile Feeder Motor Solway Automatic Mobile Feeder Motor FEAM0005 This assembly can be retro fitted to most feeders back to 2000 and in some cases a modified version can be made to fit machines back to 1992 Please specify the model and year of your machine when ordering Comes complete with alloy boss New mount features anti vibration system as standard The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced If you are using this motor in a static automatic feeder this may require increasing the feed period setting If you are using it for any of the mobile feeders you may need to spin for a longer time It is not recommended for larger kernal such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Please ensure these motors are connected with the correct battery polarity and have the correctly rated fuse in line 15amp £179.95 Available from: Agrigame UK Ltd New
Stub Axle
108.00
view Stub Axle details
ADR replacement stub axle for the Solway Trailfeeder. Can be fitted to most models from 2000 There is a four hole mounting bracket welded onto one end, which makes fitting a stub axle to a chassis easy. The pcd of the hub bolts is 100mm. Sold as a single unit. These units have sealed pre-lubricated bearings, however they do require regular maintainence and adjustment of the end float to ensure long life and it is recommended that you re-pack the hubs with fresh clean grease at least every three months. Failure to service, lubricate & adjust the bearings will void the warranty.

This axle is rated for offroad use only. Wheel bearings and maintainence when the stub axle is delivered the wheel bearings are not run in. After the first 12hrs of use the bearings must be checked and adjusted as follows: while rotating the wheel tighten the castle nut until there is a slight bind and all bearing surfaces are in contact. Then back off the castle nut 1/8 of a turn to the nearest locking hole. The wheel should rotate freely with 0.002-0.008 inch of play or end float. Lock the castle nut in place with a new split pin. Failure to replace this pin may cause the wheel & hub to come off the axle! Fresh clean grease should be applied via the grease nipple fitted or worked in by hand on the semi-sealed type. Models from February 2013 are fitted with semi-sealed pre-lubricated bearings. Do not over fill with grease as this will push off the hub-caps. Repeat for the other wheel. Ensure the hub caps are securely re-fitted. The wheel bearings must be checked and adjusted again at 100hr or one month interval whichever is sooner. It is recommended that at three month intervals the hubs are repacked with fresh clean grease and adjusted as above.
 
Stub Axle Stub Axle Stub Axle FEAM0070 ADR replacement stub axle for the Solway Trailfeeder Can be fitted to most models from 2000 There is a four hole mounting bracket welded onto one end which makes fitting a stub axle to a chassis easy The pcd of the hub bolts is 100mm Sold as a single unit These units have sealed pre lubricated bearings however they do require regular maintainence and adjustment of the end float to ensure long life and it is recommended that you re pack the hubs with fresh clean grease at least every three months Failure to service lubricate adjust the bearings will void the warranty This axle is rated for offroad use only Wheel bearings and maintainence when the stub axle is delivered the wheel bearings are not run in After the first 12hrs of use the bearings must be checked and adjusted as follows while rotating the wheel tighten the castle nut until there is a slight bind and all bearing surfaces are in contact Then back off the castle nut 1 8 of a turn to the nearest locking hole The wheel should rotate freely with 0 002 0 008 inch of play or end float Lock the castle nut in place with a new split pin Failure to replace this pin may cause the wheel hub to come off the axle Fresh clean grease should be applied via the grease nipple fitted or worked in by hand on the semi sealed type Models from February 2013 are fitted with semi sealed pre lubricated bearings Do not over fill with grease as this will push off the hub caps Repeat for the other wheel Ensure the hub caps are securely re fitted The wheel bearings must be checked and adjusted again at 100hr or one month interval whichever is sooner It is recommended that at three month intervals the hubs are repacked with fresh clean grease and adjusted as above £108.00 Available from: Agrigame UK Ltd New
view Solway Trailed Feeder details
Features our new high output, high torque UK designed and built 12vdc motor, heavy duty wiring loom and adjustable spread deflector plate.

This is a Solway Feeders designed machine which can be filled with pellets, wheat, barley or a mixture and towed behind an ATV, UTV or Land Rover Pickup type vehicle. The standard wiring loom supplied fits most ATV quad bikes, other looms are available at extra cost, please specify towing vehicle when ordering.

Please be aware this trailer is for off-road use only, max speed 10mph

The driver controls the release of feed by a switch connected to the wiring loom, and a spinner plate underneath the machine scatters the feed behind. Maximum speed must be less than 10mph. By scattering feed along the length of each feed ride and by planning your entire feed route carefully, you will not only save time, but you will also see your birds become wilder with less wandering and a better spread over the guns. The strong polyethylene hopper is totally weather proof and designed to flex over rough ground. The hopper has a recommended maximum capacity of 200kg, and is easily filled through the hinged, waterproof lid. A lesser feed weight and volume is recommended when traversing hilly or uneven ground. The 160mm spinning plate has raised edges to prevent spillages.The galvanised steel chassis and flexible mudguards are robust and long lasting.

The entire unit can be easily hooked up to a trailer hitch with standard 50mm ball hitch fittings. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The model is powered by a new UK made Solway spec 12vdc high torque high capacity motor which runs off your vehicle`s battery, featuring the new uprated looms fitted with power relay switching. We supply as standard the wiring and plugs to fit most ATV agricultural quad bikes. If you are using another type of towing vehicle utv, mule, pick-up truck or land rover etc. please specify when ordering as a different wiring loom may be available, at additional cost, contact our sales or technical team for more details. All electrical connections must be made via a 15amp inline fuse.

We stock a wide variety of spare and supplementary items for this unit, including spinner plates, motors, stub axles, wheels and tyres, tow hitches, etc.

FEED RATE approx. 250g /0.5lb feed per second based on cleaned dry wheat, controlled by a simple push button switch, and casts a wide fourteen foot spread of food.

Approx. dimensions: empty weight 150kg. Hopper capacity 200kg. Max gross weight 350kg Hopper dimensions 900x900x320mm. Overall width ( inc wheels ) 1480mm Overall height 1000mm overall length 1800mm ground clearance 345mm
 
Solway Trailed Feeder Solway Trailed Feeder Solway Trailed Feeder FE1311 Features our new high output high torque UK designed and built 12vdc motor heavy duty wiring loom and adjustable spread deflector plate This is a Solway Feeders designed machine which can be filled with pellets wheat barley or a mixture and towed behind an ATV UTV or Land Rover Pickup type vehicle The standard wiring loom supplied fits most ATV quad bikes other looms are available at extra cost please specify towing vehicle when ordering Please be aware this trailer is for off road use only max speed 10mph The driver controls the release of feed by a switch connected to the wiring loom and a spinner plate underneath the machine scatters the feed behind Maximum speed must be less than 10mph By scattering feed along the length of each feed ride and by planning your entire feed route carefully you will not only save time but you will also see your birds become wilder with less wandering and a better spread over the guns The strong polyethylene hopper is totally weather proof and designed to flex over rough ground The hopper has a recommended maximum capacity of 200kg and is easily filled through the hinged waterproof lid A lesser feed weight and volume is recommended when traversing hilly or uneven ground The 160mm spinning plate has raised edges to prevent spillages The galvanised steel chassis and flexible mudguards are robust and long lasting The entire unit can be easily hooked up to a trailer hitch with standard 50mm ball hitch fittings The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The model is powered by a new UK made Solway spec 12vdc high torque high capacity motor which runs off your vehicle s battery featuring the new uprated looms fitted with power relay switching We supply as standard the wiring and plugs to fit most ATV agricultural quad bikes If you are using another type of towing vehicle utv mule pick up truck or land rover etc please specify when ordering as a different wiring loom may be available at additional cost contact our sales or technical team for more details All electrical connections must be made via a 15amp inline fuse We stock a wide variety of spare and supplementary items for this unit including spinner plates motors stub axles wheels and tyres tow hitches etc FEED RATE approx 250g 0 5lb feed per second based on cleaned dry wheat controlled by a simple push button switch and casts a wide fourteen foot spread of food Approx dimensions empty weight 150kg Hopper capacity 200kg Max gross weight 350kg Hopper dimensions 900x900x320mm Overall width inc wheels 1480mm Overall height 1000mm overall length 1800mm ground clearance 345mm £1999.00 Available from: Agrigame UK Ltd New
top of page


  Request a catalogue
Cookies - our website uses cookies in order to work correctly - by using this website you agree to accept the use of these cookies.

Agrigame UK Ltd,

<